The aim of this project is to design a Smart IoT based Water level sensing alarm to integrate with the smart home system. Following are the specifications of the board.
- Operate on battery
- Must be installable in the overhead water tank
- Must be installable in the overhead water tank
- Sensor to read the water level
- Connect to internet
- Transmit data every 7 minutes to the server
- Battery must be chargeable
- Plastic enclosure for the entire electronics
- Device must send the battery status and water level status to the server
- Server could be a mobile phone
- Alarms if the battery is low on power, dead storage of the tank
- Operating temperature -> 0 to 50 degC
- Circuit must consume as low power as possible (calculations to be performed and battery life to be calculated)
]]>
1 Comments
Nice Blog. Thanks for sharing
ReplyDeleteExploring the Role of Semiconductors in IoT and Smart Devices
What are the common approaches to ASIC Verification?
The Impact of ASICs on the Evolution of Satellite Technology
Understanding the differences between clock gating and power gating
Understanding the Chip Design Process