Rule of Thumb: Keep out area

What will be the keep out area for the critical signals around the periphery of the board?

All the critical signals must be routed away from the periphery of the board. The reason for this is to allow the signals to have sufficient space for the return current to spread underneath the critical trace. As the critical traces go near the plane edge, the fringing field looses its return path, then Impedance goes up and the trace radiates. One more reason is to avoid any depaneling stress that cracks the copper areas.

For signals -> If the height of the trace from the reference plane is 'H', then 3-5H keep out is the rule of Thumb.

For power -> If the height of the trace from the reference plane is 'H', then 20H keep out is the rule of Thumb. This meant pulling the power planes back 20H inside the ground plane

Post a Comment

Previous Post Next Post

Facebook